Do you own and drive a Kia Sorento? Looking for suspension parts or suspension upgrades?

Then you have come to the right place.

Has your Sorento Self Levelling suspension failed? And you have just recieved the prices for replacements? If so, then you have just found the cost effective solution to your failed Sorento Suspension.

This kit is used to replace the Original Self-Levelling Suspension.. This kit is a direct bolt in replacement. NO modifications to the vehicle are required. No extra parts are required.

"Will my vehicle really be returned to its original Ride height?" Yes, definitely! There are numerous examples of Sorentos having had the Self-Levellers replaced with conventional dampers which then sit too low. This is because the original spring is too weak to support the full weight of the car as it is normally assisted in this task by the self levelling damper.

Pedders Suspension overcome this be supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.

Please note that their are 2 version of Sorento rear suspension. Upto approx mid 2007 the top mount of the shock absorber was a "loop" style mount. Later models use a "pin" style mount. This kit is for the earlier "loop" style mounts. Please see the picture if you are unsure.

Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.

Kia Sorento 2002 - 2006 JC

Kia Sorento 2002 – Mid 2007 JC (Loop)

Kia Sorento 2007 - 2009 JC

Kia Sorento Mid 2007 – 2009 JC (Pin)