Shopping Cart

Pedders Rear Suspension Conversion Kit. Raised Heavy duty. Subaru Forester, SF 803092

In stock
SKU
803092
£397.45 £331.21

Pedders Rear Suspension Conversion Kit. Raised Heavy duty. Subaru Forester, SF

This kit is used to replace the Original Self-Levelling Suspension. NO modifications to the vehicle are required. No extra parts are required. "Will my vehicle really be returned to its original Ride height?" Yes, definitely!
The original Self Levelling system has a much weaker spring than would normally be used to carry the weight of the car. In this application, the shock absorber has a hydraulic self levelling function built into it. This function, unlike a normal shock absorber, also carries part of the vehicle weight.
As a consequence, failure of the self levelling function is what causes the vehicle to sit low as it is now solely reliant on the spring to support the weight of the vehicle.
Pedders Suspension overcome this by supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.
This is the heavy duty kit suitable if you regularly carry heavy loads or tow a heavy trailer. We do another version of this kit with softer springs, Pedders part number 803038 or 803091 for those using the vehicle as normal transport. If you are unsure which kit is most suitable, please do contact one of our staff who will do their best to help you.
Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.

Key features

  • Individually shock dyno tested as a complete suspension system mated to your existing O.E. hardware for quality assurance & performance.
  • The Pedders EziFit 803092 will restore the height of your Forester.
  • Pedders Shocks are made from heavy duty twin-tube gas construction technology & heavy duty reinforced double welded mountings for long term durability.
  • The complete kit is a system designed and valved to work together.
  • All backed by our 2 Year / 25,000 mile warranty

Vehicle Height Information

Rear: 685mm with 16 inch wheels.
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit 803092 (Pedders Part Numbers)

8998L x 1 – Rear Shock Left
8998R x 1 – Rear Shock Right
7755 x 2 – Rear Spring

Make Model Year
No information

Write Your Own Review
You're reviewing:Pedders Rear Suspension Conversion Kit. Raised Heavy duty. Subaru Forester, SF 803092